here you go cal - the measurements are as follows:
Width = 7" (sits on top of the chassis tubes)
length = 22.5"
Height at rear = 15"
Height at front = 11.5"
Distance of filler cap from rear edge = 3" (to centre)
Distance of level gauge from rear edge = 11" (to centre)
The outlet is on the underside, its 5" from the front edge
the return line is at the top, on the side - near the filler cap (see pic)
There appears to be one cantral baffle, its mounted in the same plane as the front and rear panels, it appears to run the height of the tank, but with a few holed to let sensible amounts of fuel through - to prevent major sloshing!
I had a good poke around and I need a strap conversion ASAP!......the welded on brackets at the rear have broken off completley, and only one screw was holding the front on - and the whole tank - not to mention the fuel lines have perished and the top return line had actually split and ......wiat for it........was leaking fuel into the radio.......holy f$%k I was lucky to find that one :blink: .......gulp :unsure:

